Disclaimers.
Brick and stone are natural materials, and a few things are worth setting straight before you buy. These disclaimers cover how to estimate material, how to blend and install brick, and what to expect from natural stone and painted brick.
Last updated July 1, 2026
Accurate material estimation
Estimating from blueprints is a courtesy we’re glad to provide, but take-offs are not guaranteed. Coverage figures, unit counts, and any calculator results are planning tools. Actual quantities depend on your pattern, joint size, cuts, waste, and site conditions.
To estimate brick, measure height by width, subtract your openings, then multiply the resulting square footage by the brick-per-square-foot factor for your size. Square-footage estimates assume a 3/8" mortar joint. As a rule of thumb, plan on roughly 7 bags of mortar and 1 yard of sand per 1,000 brick, and 1 wall tie for every 10 brick.
Always order a reasonable overage so your material comes from the same run, and double-check final quantities with your mason before you order. The full coverage tables are on the material estimating page; for regional availability and sizing, talk to your Metro representative.
Brick blending
Brick color varies from sleeve to sleeve and pallet to pallet. That range is what gives a finished wall its depth. To get an even, natural blend rather than obvious patches:
- Always pull from several sleeves or pallets at once as you work, rather than emptying one before opening the next.
- Lay the brick out on the floor first, in the pattern you intend to install, and arrange the colors until the blend looks right.
- Step back and check the spread from a distance before it goes up on the wall.
A little planning here is the difference between a wall that reads as one material and one that looks like it came from two orders.
Guidelines for installing thin used antique brick
Reclaimed antique brick carries the marks of its first life: mortar, paint, and wear. That is exactly the appeal. A few guidelines make installation go smoothly:
- Choose which face goes out. The fired clay face carries the character: variegated, weathered color and often a sandy texture. The sawn side is the cut back, and it is very smooth. For the textured look, set the sawn side against the surface so the fired face shows.
- Wash both sides before installing. Even after cutting and rinsing, brick usually carries some dust that will interfere with adhesion if it isn’t cleaned off.
- Use broken pieces for end cuts and corners. Some breakage is normal with used brick. Those pieces are typically still perfect for cuts and trim, and we include extra material to account for it.
If an entire shipment arrives completely damaged in transit, do not accept the delivery. Refuse it, take photographs, and notify us immediately. Once a shipment is signed for, that exception no longer applies. See Breakage and Freight Damage in our Terms for the full position. For the rest of the job, see our brick installation tips.
Natural stone
Please read this section carefully. By purchasing natural stone products, you agree to these terms. Natural stone is a product of nature: variation in color, pattern, texture, and veining, including pits, fissures, fragmentation, and cracks, is inherent to the material and part of its beauty, not a defect.
- Variation. Stone inherently varies in color, pattern, and texture. What you receive may differ slightly from the sample or photos provided.
- Sample limitations. Samples give a general idea of color and veining and are typically provided small (4x4, 12x12). Full-size samples (16x16, 18x18, 24x24) are not provided unless specifically arranged.
- Reordering. Stone ordered later may differ in color and pattern and may cost more. We cannot guarantee a later order will match the original.
- Deposit and payment on cut-to-order stone. Stone cut to order is arranged with a representative rather than bought through this website. Those orders take a 50% non-refundable deposit, cannot be canceled once placed, and have the balance due on completion of cutting, with delivery scheduled once the balance is paid. Orders placed online are charged in full at checkout.
- Post-installation. Metro Brick & Stone is not responsible for stains, fissures, cracks, or breakage that occur after installation.
- Imagery. Product images are a general representation of color, veining, and variation. Because of natural variation, lighting, and monitor differences, the actual product may look different from what you see on screen.
Stone cut or selected with a representative is not sold without a signed disclaimer from the homeowner and/or builder confirming the selected stone’s color and type. Stone bought through this website is covered by the variation terms above, which you accept at checkout. Confirm color and type from a sample before you order.
Painted brick
We understand the appeal of painted brick in contemporary design. As specialists in brick, however, we strongly advise against painting new brick. Several factors matter before you paint any brick surface:
- Type of paint. Not all paints suit brick. Exterior latex or acrylic is generally recommended and must be chosen for brick compatibility; oil-based paints trap moisture and make problems worse.
- Priming and preparation. Proper priming is essential for adhesion. The wrong primer leads to peeling and flaking, and the surface must be thoroughly cleaned and fully dried first.
- Brick drying. New brick must be fully cured and dry before painting. Retained moisture can cause paint to bubble, peel, or fail early.
- Breathability. Brick is porous and designed to let moisture escape. Paint seals those pores, trapping moisture and inviting mold, efflorescence, and long-term deterioration.
- Maintenance. Painted brick needs ongoing upkeep for chipping, fading, and staining, and paint can accentuate blemishes that go unnoticed on bare brick.
- Warranty. Because of these complications, Metro Brick & Stone cannot warranty or assume responsibility for any issues arising from painting, including paint failure, damage to the brick, and moisture-related problems.
For these reasons we recommend alternatives, such as white brick with white mortar, or consulting a painter experienced with brick before you decide. Preserving the integrity of your brickwork is worth an informed choice.